==================================================
USB/RS232 Fader Start Interface - Command Mappings
==================================================
                      (updated 1st September 2023)

The commands here are issued as "one-shot" - meaning that a momentary or latching
input will always produce a single action.  A continuous input will *NOT* issue multiple commands (like holding down a keyboard button).

DAC Cartwall
1.  Player 1 Start/ReCue
2.  Player 2 Start/ReCue
3.  Player 3 Start/ReCue
4.  Fade Player 1 (and Start Player 2 if Chain is enabled)
5.  Fade Player 2 (and Start Player 3 if Chain is enabled)
6.  Fade Player 3 (and Start Player 1 if Chain is enabled)
7.  Stop Instant Player

StudioScreen
1.  LED 1 On/Off
2.  LED 2 On/Off
3.  LED 3 On/Off
4.  LED 4 On/Off
5.  LED 5 On/Off
6.  LED 6 On/Off
7.  LED 7 On/Off
8.  LED 8 On/Off

mAirList Command
1.  Player 1 Start/Stop
2.  Player 2 Start/Stop
3.  Player 3 Start/Stop
4.  Player 4 Start/Stop
5.  Automation On+Go/Next
6.  Automation On/Off
7.  Mix Editor Selection
8.  Extra PFL On/Off
9.  Your choice! eg: RUNSCRIPT C:\mAirList\StudioOnAir.mls (default: Playlist 2, Player 1 Start/Stop)
10. Your choice! eg: RUNSCRIPT C:\mAirList\StudioOffAir.mls (default: Playlist 3, Player 1 Start/Stop)
(buttons 9+10 default for Dalet/OmniPlayer style layouts)

Myriad v5/v6 Playout
1.  Player 1 Start
2.  Player 2 Start
3.  Player 3 Start
4.  Player 4 Start
5.  Log Go/Next
6.  Item Toggle Ending (chain or stop+wait)
7.  Open/Close Segue Editor
8.  Play Selected Item's Hook
9.  Your choice!
10. Your choice!